Tips for Construction of Putty
1. Why can't a putty be scraped before the putty is dry?
A: In general, the wall of the family decoration Putty is done two times, the first time is to the entire wall leveling, the second is to have no leveling place to do the local processing. But sometimes we find that the putty on the wall is arching up. According to the observation, most of the reasons are due to the first time the putty did not fully dry the workers to the second time the putty scrape, the result in the first time putty drying process of the second time Putty arch up.
2. What do I need to do to paint the ceiling and the walls?
Answer: In the home decoration construction process, sometimes because of the tight duration, so, some necessary process is easy to be omitted by the workers; take the paint worker's operation for example: before painting the walls and ceilings, originally should carry on the wall surface clean up, the wall surface dust, the superfluous putty sweep clean, the crack which appears to do the processing, the wall as well as the ceiling and the wood product's junction do the protection, avoids the wood product to be painted in the paint, these all are in the brush paint before completes.
3. Why is the nail-eye patch on the surface of wood products critical?
A: For wood products, carpentry in the production process, whether it is the use of ordinary nails or the use of gas nails, will inevitably be left nailed on the surface, and paint workers an important job is to fix the nail eye; good paint workers will nail eye repair in a certain distance is difficult to see, technology and the poor sense of responsibility of the paint workers repaired nail eyes in a very close distance will also see clearly, this not only affect the visual effects of wood products but also affect the life of wood products.
4. Why choose a paint brush that doesn't lose hair?
Answer: Some workers use the paint brush quality is very poor, love to lose hair, with such brush paint, often will brush hair hanging on the surface of the paint, paint film, stay in the paint, the effect of the paint is very influential. Therefore, brush paint should be as much as possible with a good quality paint brush. If it's a new brush, pay attention to the hammers hairs on the brush, or use a lighter to burn the float.
- August 18, 20172004 jg/t157 internal and external wall Putty Standard, there is also a flexible external wall putty standard, this standard mainly for internal and external wall putty standards. This standard starte...view
- August 18, 2017Ceramic Tile Adhesive Product characteristics1, the composition of ceramic tile adhesiveCeramic tile binder using high-quality inorganic cementitious materials, fine aggregates, Portland cement, a sma...view
- September 15, 2017HUAMAO Said:1. the emulsion solid content about 53%, that is, about 1.9 tons of emulsion solidified into a ton of polymer powder, if the count of 2% water content that is 1.7 tons of latex to do a ton...view
- August 18, 2017Inner wall Putty Powder use steps:1, the grass-roots should be solid, clean, roughly flat, no clear, grass-roots strength should be greater than or close to the strength of putty.2, absorbent strong g...view
- August 18, 2017Into the June, the weather gradually hot, the sun also began to vicious up, walking on the road to the suburbs, roadside large golden fields of wheat, bursts of dry wind blowing over, wheat undulating...view
- August 18, 2017On June 1, at the eighth session of the International Forum on Infrastructure Investment and construction, the China Foreign contracted Contractors ' Association officially released the National Infra...view