Polymer Powder Cost
1. the emulsion solid content about 53%, that is, about 1.9 tons of emulsion solidified into a ton of polymer powder, if the count of 2% water content that is 1.7 tons of latex to do a ton of powder, plus 10% of ash, about 1.5 tons of latex out of a ton of rubber powder. Emulsion price is transparent, about 8000 tons, plus labor costs and other costs, that is, the cost of dispersing latex powder should be around 12000-13000, the real market price of polymer powder sales are generally around 14000-15000. Too low polymer powder prices, although not excluding the advantages of raw materials, the brand has a few flying in the raw material price advantage is unknown.
Those who do not have the polymer powder bargaining of small factories are basically adulterated ... HUAMAO focus on domestic and foreign brands can disperse latex powder! Low price, high quality.
2. the dispersible polymer powder is a multi-purpose polymer powder, is the polymer emulsion after the formation of spray drying powder, also known as dry glue. This powder can be quickly reduced to the emulsion after contact with water and retains the same properties as the initial emulsion, that is, the water evaporates to form a membrane. The film has high flexibility, high weather ability and highly cohesive property of various substrates, which can be used as adhesives, for a variety of building materials such as: internal and external wall putty powder, dry powder coating, cement mortar, batch mud, filling materials, repair mortar, high-grade plastering, external wall insulation system, (elastic) ceramic tile adhesives (ceramic tile binder, Yi mortar), batch swing material, Self-Leveling cement, Interface agent, caulking agent, Gypsum mortar insulation system and the flexibility of the high demand for polymer mortar products such as dry Mix mortar series products.
- September 15, 2017Re-dispersible Polymer powder plays an important role in cement mortar, especially the insulating mortar and functional mortar. China is the NO.2 output of re-dispersible polymer powder country in the...view
- August 18, 2017After the PVA powder is mixed with other powders, the paste slurry is formed by adding water. After evaporation, the structure of inorganic and organic binder is formed, the brittle rigid skeleton of ...view
- August 18, 2017Into the June, the weather gradually hot, the sun also began to vicious up, walking on the road to the suburbs, roadside large golden fields of wheat, bursts of dry wind blowing over, wheat undulating...view
- August 18, 20171. Why can't a putty be scraped before the putty is dry?A: In general, the wall of the family decoration Putty are done two times, the first time is to the entire wall leveling, the second is to have ...view
- August 18, 2017Wall Leveling putty: for building paint base levelingExternal wall Cement Leveling putty Advantages:A. Provide a good base surface, reduce the amount of paint, reduce the cost of the projectB. Strong ...view
- August 18, 2017On June 1, at the eighth session of the International Forum on Infrastructure Investment and construction, the China Foreign contracted Contractors ' Association officially released the National Infra...view